|
[FLEX100] FLEX Thru Hole Daughter Board |
|
The board, depicted in picture below, is targeted for the development of small, homemade, custom circuits that can be transparently interfaced with the FLEX Base Boards. 
Check technical details (PDF) The board makes available to the user several common pinholes for connecting electronic components. Pinholes marked with "piggybacking" are pins which come from the piggybacked FLEX board. Each pin on the piggybacking row is connected to a pin on the most wide board section. The remaining board surface is divided into the most common pinhole patterns, such as: - Standard 2.54mm pattern
- Standard 2.54mm alternate pattern, useful for RJ45 and RS232 connectors, etc.
- Standard 1.27mm pattern, useful for connecting typical SMD components
- Standard 5.08mm pattern, useful for clamps
|